CTF-40 Fast evaporating solvent-based water-oil repellent stain-resistant impregnating agent, ideal for both interior and exterior use, 1 LT.

CTF-40 is ideal for the protection of for materila with medium and high absorban: marbles, granites, natural stones, terracotta, klinker, cement, terrazzo, agglomerates, concretes, calcareous agglomerates, etc.

CTF-40 is highly protective, stain resistant, resistant to oil stains and dirt in general.

Anti-smear, anti-graffiti, as it reduces the penetration of paints allowing easy cleaning.

Floors and artifacts treated with CTF-40 can be cleaned with ordinary neutral detergents.

HOW TO USE IT?

Spread CTF-40 product on perfectly clean and dry, cool surfaces that are not exposed to solar radiation (i.e., not during excessively hot hours of the day) with a brush, preferably with low-pressure sprayers with a 0.5 mm nozzle, or with an airless spray gun at a distance of about 20 cm from the surface.

Any excess CTF-40 can be removed with a clean white cloth pad moistened with the same product or with a monobrush equipped with a soft disc.

It is recommended to repeat the operation a few hours after applying the first coat.

If used outdoors, plan for it not to rain for at least 12 hours.

After 6/8 hours, the finishing treatment can be applied.

INDICATIVE YIELD:

Approximately 7-10 liters per 100 m² per coat, depending on the absorption of the material.

In line with the regulations currently in force, for some Countries we do not guarantee the delivery of this item, categorized as Dangerous Goods.

If you order this article, but it is not possible to ship it in your Country you will contacted and refund.