MARMOLUX Polishing powder for calcareous materials | Federchemicals

MARMOLUX Polishing powder for calcareous materials difficult to polish | Federchemicals

MARMOLUX is a special product for polishing very delicate or very calcareous light-coloured marble, such as marble containing a high amount of calcium carbonate or limestone

Sold in packaging of 5 KG

On calcareous surfaces, thanks to its excellent abrasive power and various highly reactive components, it allows professional operators to achieve perfect mechanical polishing

HOW TO USE?

First of all, it is recommended to clean the surface to be sanded well from all those construction site residues such as: rubble, nails, etc.

Apply MARMOLUX polish with a soft sponge and place the machine firmly in place. You open the water valve slightly and begin polishing. MARMOLUX polish in contact with water and marble should create a mush, with which we will polish. It should never be too dry, because it would not allow the machine to flow, nor should it be too liquid because it would not allow the polish to have the right chemical reaction.

When the mush runs out, it will be sufficient to add more new polish without removing the remaining one.

MARMOLUX polish is created so that it never burns the material, even under working conditions with very high temperatures.

If you have been sanding with a traditional machine but with diamond tools, you will be able to polish after passing gr 400, even better if you pass gr 800. A patina of product will remain on the floor; it is advisable to remove the patina from a small area using a rag in order to check the degree of gloss obtained and, if necessary, repeat the operation.

At the end of the polishing treatment, it is recommended to remove all the patina, making use of a neutral detergent. It is recommended to rinse very well with clean water.