Device to perform 45° bevel cut (Jolly) BC45 -Raimondi

BC45 Portaflex for making 45° angled cuts -Raimondi

Device to perform 45° bevel cut high quality finishing (“Jolly” bevel) directly on construction site (actual miter angle: 47°)

The device can be used either dry with a dust extractor or with water (in combination with – Art. 433PWW A)

The maximum slab / tile thickness depends on the disc used: 16 mm with Ø 115 mm disc and 20 mm with Ø 125 mm disc

The anti-scratch plastic slides ensure optimal smoothness on the slab/tile

The BC45 Portaflex Raimondi is suitable with almost angle grinders with power between 600- 1100W withM14 arbor attachment

Supplied with Ø 115 “Cross-Turbo” disc, owner’s manual

Angle grinder not included

MODE OF USE

It works leaning and sliding on the edge of the tile (or slab): this guarantees a fast and precise work execution and allows to work without any limit on length

The two handles are designed to easily allow the necessary pressure during the entire length of the miter cut (entrance, slab side, exit) to guarantee both optimal results and maximum ergonomics

Blade tilt adjustment: by acting onto dedicated screw, blade can be tilted to prevent its rear chipping the edge of tiles/slabs

Cutting depth adjustment: by adjusting the dedicated knobs, it is possible to determine the amount of material to be removed (farther or closer to tile glaze). Once the adjustment is set, it stays for any tiles/slabs thicknesses